Service center

  • +886-4-2659-5203
  • +886-4-2659-5096
  • info@stanch.com.tw
  • No.51, Ching 1st Road, Chungkang Export Processing Zone, Wuchi District, Taichung City 43541, Taiwan, R.O.C.
Stainless Steel Sheet

Stainless Steel Sheet

  Stanch was founded in 1980 as professional manufacturer of stainless steel sheets, stainless steel plates and stainless steel coils. . Its policy is to manufacture and provide an extensive range of high quality stainless steel sheets to both traders and end users. The stainless steel plate is widely used in architecture, decorations and kitchenware. If you are interested in the stainless steel sheets and stainless steel plate, please contact us.

  Stanch provides cold rolled sheets in multiple finishes and dimensions which are highly appreciated for high performance and premium quality.

         

STANDARD
  • ASTM A240M – Chromium and Chromium – Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and for General Applications.
  • ASTM 480M – General Requirements for Flat Rolled Stainless and Heat-Resisting Steel Plate, Sheet and Strip
  • EN 10088-2
FINISH AND SPECIFICATION
No.1

A rough, dull surface, which results from hot rolling to the specified thickness, followed by annealing and descaling.

Range (mm) 1000 1219 1250 1500 1524
3.0~6.0
8.0~100.0      
2D

A dull finish which results from cold rolling followed by annealing and descaling, and may perhaps gets a final light roll pass through unpolished rolls. A 2D finish is used where appearance is not a concern.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
2B
(Mill Finish)

A bright, cold-rolled finish resulting in the same manner as 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used as is, or a preliminary step to polishing

Range (mm) 1000 1219 1250 1500 1524
0.3-6.0
BA
(Bright Anneal)

The bright annealed mill surface is obtained by annealing the material under an atmosphere, so that scale is not produced on the surface.

Range (mm) 1000 1219 1250 1500 1524
0.3-2.0
Brushed Finish
(No.3/No.4/No.5/No.6)

This is a ground unidirectional finish obtained with 150/180/240/320 grit abrasive, which is characterized by parallel brushing lines, it is also known as Satin.

Range (mm) 1000 1219 1250 1500 1524
0.3-6.0
Scotch Brite

It's a semi-dull finish with uniform grain, which is obtained using finer abrasives than No.4/NO.5/NO.6. This finish has smooth, soft and exquisite grains which has a low level of reflectivity and unidirectional texture.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
Hairline

Seemingly endless polishing lines extend uniformly along with the length of the coil give the hairline. It's a well-defined directional finish with long-grain and fine-line.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
Super Mirror
(No.8)

This is a polished finish having a high degree of reflectiveness which can be done on all the grades of stainless steel. It is produced by progressively using finer abrasives and finally finishing with extremely fine buffing compounds. The final surface is blemish free with a high degree of image clarity.

Range (mm) 1000 1219 1250 1500 1524
0.3-6.0
Vibration

Vibration is a multi-directional finish. It is also known by the names Non-Directional Satin and Angel Hair. Vibration has a uniform texture with random, multi-directional grit lines.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
CD Overlay

CD Overlay is a patterned polished steel finish that is applied mechanically to the surface of stainless steel sheets. These stainless polished steel finishes can be created with various visual effects, which are designed for architectural and other applications.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0    
Bead Blast

This finish results in a non-directional textured surface with a soft satin reflection and low reflectivity.This finish has an aesthetic appeal and enhances the surface properties of stainless steel.

Range (mm) 1000 1219 1250 1500 1524
0.3-2.0    
Etched Finish

Etched patterns are created by selectively applying a protective acid resistant film to a highly polished surface and acid etching the unprotected areas. The etching removes a thin layer of stainless steel, changes the color to a dull silver gray, and roughens the surface. Etched finished made an attractive surface on the metal, which is applied on architectural and other applications.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
Embossed Finish

Embossed finish is a stainless steel finish that is uniformly textured. There are two main types of Embossed Finish: 1 sided pattern, where the reverse side is paint; another one is 2 sided patterns where the pattern is imprinted through to reverse side.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
PVD Coating

Physical Vapor Deposition (PVD) is a process to produce a metal vapor (titanium, chromium and aluminum) that can be deposited on electrically conductive materials as a thin highly adhered pure metal or alloy coating. The process is carried out in a vacuum chamber at vacuum using a cathodic arc source. A wide variety of colors can be achieved by adding other gases during the deposition.

Range (mm) 1000 1219 1250 1500 1524
0.3-3.0
  • Special dimensions was accepted on request
  • Customized specific cut-to-length are acceptable from 100mm – 4000mm

PACKING
  • Standard Coating: Paper Interleaved, PE or Laser PE Coating are available
  • Standard Package: Waterproof wrapping and cardboard encase all the pack of the sheets, with metal edge production for all top edges. The strap aligned from bottom bearer to the top, with edge protection on all top corners that meets the sheets
  • Wooden Pallets or customized Pallets are acceptable
  • Metal Pallets are acceptable upon request

PRODUCTS

No.4

ARCHITECTURE

Grinding finish, also called brushed, directional or satin finish. It was characterized by short,...

more >

Hairline

DECORATION

Higher grit numbers produce finer polishing lines. The general purpose of this finish is widely used for...

more >

MIRROR

KITCHEN WARE

Mirror (No.8, Non-Directional) is a high gloss, polished finish, having a high degree of reflectiveness...

more >

PVD - GOLD COATING

BATHROOM WARE

PVD is the abbreviation of Physical Vapor Deposition. It’s a process to produce a metal vapour...

more >

PVD - Black Coating

BATHROOM WARE

PVD is the abbreviation of Physical Vapor Deposition. It’s a process to produce a metal vapour...

more >

PVD - Brass Coating

BATHROOM WARE

PVD is the abbreviation of Physical Vapor Deposition. It’s a process to produce a metal vapour...

more >

PVD - Rose Coating

BATHROOM WARE

PVD is the abbreviation of Physical Vapor Deposition. It’s a process to produce a metal vapour...

more >

PVD - Zircon Coating

BATHROOM WARE

PVD is the abbreviation of Physical Vapor Deposition. It’s a process to produce a metal vapour...

more >

Vibration

BATHROOM WARE

Vibration is a multi-directional finish, which was also known by the names Non-directional Satin and Angel Hair.

more >

CD Overlay

BATHROOM WARE

CD Overlay, which was also known by the names Circle CD, is a patterned polished steel finish that is applied mechanically to ...

more >
slideshow

SERVICE CENTER

  • +886-4-2659-5179
  • +886-4-2659-5096
  • info@stanch.com.tw
  • No.51, Ching 1st Road, Chungkang Export Processing Zone, Wuchi District, Taichung City 43541, Taiwan, R.O.C.